3DP3BLROD60A-Iris mechanism for 3d printing Model do druku 3D

$9.90
3DP3BLROD60A-Iris mechanism for 3d printing Model do druku 3D
$ 9.90
Usuń to! Dodaj zakładkę przy tym produkcie
  • Kolekcja:
    No
  • Gotowy do wydruku:
  • 3D Scan:
    No
  • Adult content:
    No
  • PBR:
    No
  • Liczba wyświetleń:
    3521
  • Data:
  • ID produktu:
    418339
  • Oceny:
Iris mechanism designed for 3d printing. There are 3 blades. When you rotate the "Drive Part"or the middle plate, the center hole can open or close gradually. The center hole is diameter 60mm, the outer size is diameter 140mm and thickness is 12.3mm. To assemble the parts togther,you need to prepare some M2 screws. It is best to use resin material when 3d printing. And you may need to sand some parts due to the 3d printing quality.
Parts should be printed separately and then assembled together.
Free 3dpdf files: https://www.twothreed.com/
Potrzebujesz plik w innym formacie?
Jeśli potrzebny Ci plik w innym formacie, zgłoś taką potrzebę przez opcję Support Ticket Konwertujemy produkty na następujące formaty: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nie konwertujemy scen 3D oraz formaty takie jak .step, .iges, .stp, .sldprt.!

Pobierz 3DP3BLROD60A-Iris mechanism for 3d printing Model do druku 3D step Od monk3947

mechanical-iris iris-mechanism 3d-print mechanical-part robot-part robotic door-design windows-design gadget shutter irisdiaphragm
Brak komentarzy dla tego produktu.