design of arc welding workstation with single robot and double fixture Model 3D

$14.00
design of arc welding workstation with single robot and double fixture Model 3D
$ 14.00
Usuń to! Dodaj zakładkę przy tym produkcie
  • Model animowany:
    No
  • Tekstury:
    No
  • Oparty na szkielecie:
    No
  • Materiał:
  • Low-poly:
    No
  • Kolekcja:
    No
  • UVW mapping:
    No
  • Plugins Used:
    No
  • Gotowy do wydruku:
    No
  • 3D Scan:
    No
  • Adult content:
    No
  • PBR:
    No
  • Geometria:
    Polygonal
  • Unwrapped UVs:
    Unknown
  • Liczba wyświetleń:
    1861
  • Data:
  • ID produktu:
    314447
  • Oceny:
design of arc welding workstation with single robot and double fixture
catia 3d modeling with stp file and bip file is attached to the scheme design of single robot dual fixture arc welding workstation. the failure rate of the system is low. however, the robot is in the waiting state during the loading and unloading process, so the utilization rate of the robot is generally less than 80%, so it is less used in the new welding line. this form has high reliability, but it has certain restrictions on the overall size of the workpiece to be welded. generally, the diameter of the welded workpiece is less than 0.6 mm. Gotowy do wydruku: Nie
Potrzebujesz plik w innym formacie?
Jeśli potrzebny Ci plik w innym formacie, zgłoś taką potrzebę przez opcję Support Ticket Konwertujemy produkty na następujące formaty: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nie konwertujemy scen 3D oraz formaty takie jak .step, .iges, .stp, .sldprt.!

Pobierz design of arc welding workstation with single robot and double fixture Model 3D catia step Od tzd

arc welding
Brak komentarzy dla tego produktu.