drive propeller Low-poly Model 3D

END SPRING SALE 50% OFF
expires on May 24th, 2025
$9.99 -50%
$4.99
4 DAYS SALE
drive propeller Model 3D
$9.99 -50%
$ 4.99
Usuń to! Dodaj zakładkę przy tym produkcie
  • Dostępne formaty:
    Hypershot: bip 538.04 kb
    Collada: dae 421.59 kb
    Autodesk FBX: fbx 386.51 kb
    Wavefront OBJ: obj 480.12 kb
    Stereolithography: stl 248.53 kb
    3DS MAX all ver.: 3ds 280.75 kb
  • Model animowany:
    No
  • Tekstury:
    No
  • Oparty na szkielecie:
    No
  • Materiał:
  • Low-poly:
  • Kolekcja:
    No
  • UVW mapping:
    No
  • Plugins Used:
    No
  • Gotowy do wydruku:
    No
  • 3D Scan:
    No
  • Adult content:
    No
  • PBR:
    No
  • Geometria:
    Polygonal
  • Unwrapped UVs:
    Unknown
  • Liczba wyświetleń:
    2410
  • Data:
  • ID produktu:
    383754
  • Oceny:
a propeller is a device with a rotating hub and radiating blades that are set at a pitch to form a helical spiral, that, when rotated, exerts linear thrust upon a working fluid, such as water or air. propellers are used to pump fluid through a pipe or duct, or to create thrust to propel a boat through water or an aircraft through air. the blades are specially shaped so that their rotational motion through the fluid causes a pressure difference between the two surfaces of the blade by bernoulli's principle which exerts force on the fluid. most marine propellers are screw propellers with helical blades rotating on a propeller shaft with an approximately horizontal axis. Gotowy do wydruku: Nie
Potrzebujesz plik w innym formacie?
Jeśli potrzebny Ci plik w innym formacie, zgłoś taką potrzebę przez opcję Support Ticket Konwertujemy produkty na następujące formaty: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nie konwertujemy scen 3D oraz formaty takie jak .step, .iges, .stp, .sldprt.!

Pobierz drive propeller Model 3D bip dae fbx obj stl 3ds Od Norezero

propeller watercraft propulsion ship boat yacht twinscrew shaft
Brak komentarzy dla tego produktu.