Ferrari 625 TRC Spider - Car Kit - 0680 MDTR Model do druku 3D

3D Printable Car Kit. This is a full 3d printable kit of Ferrari 625 TRC - 0680 MDTR version. Only two Ferrari 625 TRC Spider Scaglietti were manufactured in 1957. They were based on the 500 TRC model, but upgraded by factory to 2.5-litre specification. These two examples of breathtaking beauty are some of the most gorgeous cars ever made by Ferrari, according to the brand’s historian, Richard F. Merritt. One of the two vehicles was purchased by the Austrian-origin, American pilot John Von Neumann, famous for importing European sports cars to the United States and for founding the California Sports Car Club. Between 1957 and 1959, Von Neumann drove the mighty 625 Trc in many races – Pebble Beach, Pomona, Hawaii and Santa Barbara, to mention but a few – earning three podiums and two 1st place victories. It continued on to have a prolific career, even in vintage races all the way up to 2011 Montery Historic Races. Despite those successes and the ones that would come later, the real triumph remains its beauty.

The 3d model is very detailed, so make sure your printer can handle all the details before buying it. It is in real-world scale with increased overall width, so that you decide which scale you want to print the parts at. The first part (001-0680-body-main-1) is also the biggest, so you can decide while previewing it. If you want to sample a couple of parts to preview and test print (including the biggest part) before buying please use this link and download the appropriate archive: https://drive.google.com/drive/u/0/folders/1R3JfsosR40cHbkbEBuf88TfWUNhd_ZDB

It contains 254 interlocking parts in STL, STEP Fusion 360, SolidWorks assembly, 3MF, Rhino 3DM, IGES, Parasolid, PLY, DAE, DXF, FBX, USD, WRL and OBJ files. You can print them separated or you can choose to merge multiple parts and print together. There is a STL containing all parts merged so you can preview the whole model before you start printing, and there are multiple STL files for each part. I recommend the STEP, Parasolid, Solidworks, F3D, or 3MF files for printing as they have a better resolution than STL, but you can use whichever you like, just adopt the same scale for all parts for them to fit.

It also contains multiple PNG files for artwork (dash gauges, emblems etc) to be printed and glued to the model and some SVG files with bumpmaps for the tire sidewalls if you want to use them for displacement (3D texture).

The original 3ds Max files used to create the whole model are included.

Use 7-Zip to extract the archives if you have issues with them.

You are allowed to sell the 3d printed parts or the whole kit after printing, but you are not allowed to share or sell the digital 3d model.

Don't forget to rate the model. Thanks.