English
Español
Deutsch
日本語
Français
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदीhawkeyes arrow from the avengers 3d print model Model do druku 3D
-20%
mb mb mb mb mb step stl stl mb
Vetrock
Other
-20%
bip max obj sat prt step prt prt max
Vetrock
Other
-20%
bip max sat sldprt step stl x x
Vetrock
Other
-20%
max bip dwg dxf max max stl sat sldprt
Vetrock
Other
-20%
x max sat max step max bip max max
Vetrock
Other
-20%
bip max obj sat sldprt step stl stl x
Vetrock
Other
-20%
max bip max max sat sldprt step stl x
Vetrock
Other
-20%
png max sat sldprt step stl x x
Vetrock
Other
-20%
ma ma ma ma ma ma ma ma ma
Vetrock
Other
-20%
ls iges obj sat sldprt step stl stl ls
Vetrock
Other
- Dostępne formaty: 3DS MAX: max 152.17 kbACIS: sat 118.17 kbSolidWorks: sldprt 1.96 MBSTEP: step 115.42 kbStereolithography: stl 1.40 MBStereolithography: stl 1.42 MBDirectX: x 39.40 kbDirectX: x 49.01 kbHypershot: bip 2.30 MB
- Kolekcja:
- Gotowy do wydruku:
- 3D Scan:No
- Adult content:No
- PBR:No
- Liczba wyświetleń:2270
- Data: 2020-05-08
- ID produktu:291916
- Oceny:
these arrows were used by hawkeye in the 2012 movie the avengers. the arrow is modeled on moments from the movie and all the information that can be found on the internet.
the tip can be screwed onto the arrow. this was also taken from the film, the tips were wound in a quiver and manually.
i really liked this idea and decided to use it in my model.
model dimensions:
length - 776 mm
the length is specified without the tip.
the diameter of the boom body is 8 mm.
the arrow body is divided into five parts for easy printing. there is also a file with the entire body of the arrow, you can break it yourself as you will be better. screenshots of the details are shown below
the diameter of the keys to assemble 4 mm
designed in solid works 2018, rendered in keyshot 9.
Czytaj więcejthe tip can be screwed onto the arrow. this was also taken from the film, the tips were wound in a quiver and manually.
i really liked this idea and decided to use it in my model.
model dimensions:
length - 776 mm
the length is specified without the tip.
the diameter of the boom body is 8 mm.
the arrow body is divided into five parts for easy printing. there is also a file with the entire body of the arrow, you can break it yourself as you will be better. screenshots of the details are shown below
the diameter of the keys to assemble 4 mm
designed in solid works 2018, rendered in keyshot 9.
Potrzebujesz plik w innym formacie?
Jeśli potrzebny Ci plik w innym formacie, zgłoś taką potrzebę przez opcję Support Ticket Konwertujemy produkty na następujące formaty: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nie konwertujemy scen 3D oraz formaty takie jak .step, .iges, .stp, .sldprt.!
Jeśli potrzebny Ci plik w innym formacie, zgłoś taką potrzebę przez opcję Support Ticket Konwertujemy produkty na następujące formaty: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nie konwertujemy scen 3D oraz formaty takie jak .step, .iges, .stp, .sldprt.!
Pobierz hawkeyes arrow from the avengers 3d print model Model do druku 3D max sat sldprt step stl stl x x bip Od Vetrock
theavengers avengers hawkeye hawkeyes arrow bow equipment movie prop replica print printable toy superhero collectible cosplay games toysKolekcje
collapsible hawkeye bow 3d print modelVetrockMan$20.00
Brak komentarzy dla tego produktu.
Podobne produkty Od hawkeyes arrow from the avengers 3d print model
-20%
max sat step stl stl x x bip sldprt
Vetrock
Other
-20%
bip max sat sldprt step stl x x
Vetrock
Other
