Of a hydrofoil board with a rigid wing sail Model 3D

$15.00
Of a hydrofoil board with a rigid wing sail Model 3D
$ 15.00
Usuń to! Dodaj zakładkę przy tym produkcie
  • Dostępne formaty:
    3DS MAX: max 47.65 MB
    Autodesk FBX: fbx 98.74 MB
    IGES: iges 2.18 MB
    Wavefront OBJ: obj 70.77 MB
    SolidWorks: sldprt 11.50 MB
    STEP: step 8.51 MB
    Stereolithography: stl 16.14 MB
    Image Textures: jpg 2.19 MB
  • Model animowany:
  • Tekstury:
  • Oparty na szkielecie:
    No
  • Materiał:
  • Low-poly:
    No
  • Kolekcja:
    No
  • UVW mapping:
    No
  • Plugins Used:
    No
  • Gotowy do wydruku:
    No
  • 3D Scan:
    No
  • Adult content:
    No
  • PBR:
    No
  • Geometria:
    Polygonal
  • Unwrapped UVs:
    Unknown
  • Liczba wyświetleń:
    3111
  • Data:
  • ID produktu:
    408761
  • Oceny:
Conceptual design of a hydrofoil sailboard with a rigid wing sail
The project was developed on the basis of a rigid wing sail. Now it can rotate and
tumble to the side. The board itself is equipped with two-tier high-speed hydrofoils,
which allow at low speeds to transfer the board to planing mode, and at
increase in speed - completely lift the board out of the water, thereby reducing
resistance.
The 3D model is made in the form of: hull parts, sail parts, as well as a ballast centerboard and keel.
All peace and goodness. Gotowy do wydruku: Nie
Potrzebujesz plik w innym formacie?
Jeśli potrzebny Ci plik w innym formacie, zgłoś taką potrzebę przez opcję Support Ticket Konwertujemy produkty na następujące formaty: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nie konwertujemy scen 3D oraz formaty takie jak .step, .iges, .stp, .sldprt.!

Pobierz Of a hydrofoil board with a rigid wing sail Model 3D max fbx iges obj sldprt step stl jpg Od vexpert

sail yacht concept conseption sailboard windsurfing nautical proekt
Brak komentarzy dla tego produktu.