Pulling tractor with 4 jet engines Scale 1 to 25 Model do druku 3D

$30.00 -10%
$27.00
Licencja:
No AI Training
Pulling tractor with 4 jet engines Scale 1 to 25 Model do druku 3D
$30.00 -10%
$ 27.00
Usuń to! Dodaj zakładkę przy tym produkcie
  • Dostępne formaty:
    Dowolna konwersja formatu
    Stereolithography: stl 37.57 MB
    Wavefront OBJ: obj 16.74 MB
    IGES: iges 12.66 MB
    Wavefront OBJ: obj 16.73 MB
    ACIS: sat 24.10 MB
    STEP: step 17.09 MB
    Stereolithography: stl 62.40 MB
    DirectX: x 11.82 MB
    DirectX: x 13.11 MB
  • Kolekcja:
    No
  • Gotowy do wydruku:
    Yes
  • 3D Scan:
    No
  • Adult content:
    No
  • PBR:
    No
  • AI Szkolenie:
    No
  • Liczba wyświetleń:
    2486
  • Data:
  • ID produktu:
    393947
  • Oceny:
Zgłoś ten produkt

Model dimensions:
- length - 216 mm
- width - 95 mm
- height - 79 mm

The model consists of parts: Engine middle bottom parts, Engine middle upper parts, Engine rear tubes, Engines front part, Engines rear part, Frame, Front rims, Front tires, Rear rims, Rear tires, Reductor, Seat, Shell, Steering wheel, Tank.

During assembling use metal pins with diameter 2 mm.

Potrzebujesz plik w innym formacie?
Jeśli potrzebny Ci plik w innym formacie, zgłoś taką potrzebę przez opcję Support Ticket Konwertujemy produkty na następujące formaty: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nie konwertujemy scen 3D oraz formaty takie jak .step, .iges, .stp, .sldprt.!

Pobierz Pulling tractor with 4 jet engines Scale 1 to 25 Model do druku 3D stl obj iges obj sat step stl x x Od CosplayItemsRock

pulling tractor pullingtractor drag dragster sport jet jetengine diecast scaled toy
Brak komentarzy dla tego produktu.

Podobne produkty Od Pulling tractor with 4 jet engines Scale 1 to 25

-10%
Pulling tractor with 2 jet engines Scale 1 to 25 Model do druku 3D
-10%
Pulling tractor with longitudinal V8 engines Scale 1 to 25 Model do druku 3D
-10%
Pulling tractor with transverse V8 engines Scale 1 to 25 Model do druku 3D
-10%
Pulling tractor with 3 jet engines Scale 1 to 25 Model do druku 3D
-10%
Pulling tractor with 4 jet engines Version 2 Scale 1 to 25 Model do druku 3D
-10%
Pulling tractor with 2 jet engines Version 2 Scale 1 to 25 Model do druku 3D
-10%
Pulling tractor with 4 jet engines Version 3 Scale 1 to 25 Model do druku 3D
-10%
Twin-engine V8 for pulling tractor Scale 1 to 25 Model do druku 3D
-10%
Pulling tractor rear tire scale 1 to 25 Model do druku 3D
-10%
Pulling tractor rear tire 2 scale 1 to 25 Model do druku 3D