wheelchair Low-poly Model 3D

wheelchair 3d model created in 3ds max 2012.it is a ploy model.
a self-propelled manual wheelchair incorporates a frame, seat, one or two footplates (footrests) and four wheels: usually two caster wheels at the front and two large wheels at the back. there will generally also be a separate seat cushion. the larger rear wheels usually have push-rims of slightly smaller diameter projecting just beyond the tyre; these allow the user to manouevre the chair by pushing on them without requiring them to grasp the tyres. manual wheelchairs generally have brakes that bear on the tyres of the rear wheels, however these are solely a parking brake and in-motion braking is provided by the user's palms bearing directly on the push-rims. as this causes friction and heat build-up, particularly on long downslopes, many wheelchair users will choose to wear padded wheelchair gloves. manual wheelchairs often have two push handles at the upper rear of the frame to allow for manual propulsion by a second person, however many active wheelchair users will remove these to prevent unwanted pushing from people who believe they are being helpful Gotowy do wydruku: Nie